Machine Learning Regression Showdown: Kernel Ridge Regression vs. Support Vector Regression Using Scikit

Bottom line: I compared kernel ridge regression (KRR) and support vector regression (SVR), using a small set of synthetic data. The results were essentially the same.

Over the past few years, based on several machine learning regression projects that I worked on, I have noticed that kernel ridge regression and support vector regression usually give pretty much the same results. This suggests that the kernel mechanism is more important than the error function (mean squared error for KRR, epsilon-insensitive loss for SVR). Put another way, KRR and SVR are really the same except they penalize incorrect predictions in different ways.

One morning before work, I figured I run a short investigation, using the scikit-learn KernelRidge and SVR modules. The key results were nearly identical:

# KRR:
# gamma = 0.1000
# alpha = 0.0010
# Accuracy (within 0.10) train = 0.9700
# Accuracy (within 0.10) test = 0.9500

# SVR:
# gamma = 0.1000
# C = 10.0000
# epsilon = 0.0100
# Accuracy (within 0.10) train = 0.9650
# Accuracy (within 0.10) test = 0.9500

The synthetic demo data has 200 training items and 40 test items, small, so the difference between the accuracy of the KRR model (97.00% = 194 out of 200 correct) and the SVR model (96.50% = 193 out of 200 correct) is not significant.

In my opinion, KRR is preferable to SVR in most scenarios because KRR has one less hyperparameter to tune, and the underlying KRR training/optimization algorithm is much simpler (either closed form with matrix inverse or SGD for very large datasets) than SVR training/optimization (hideously complicated quadratic programming). Also, KRR scales better than SVR for large datasets (you can use SGD training).

The only advantage of SVR over KRR is that while KRR requires you to store all training data items (for making predictions), even though SVR must store training items too, but during training, SVR removes some items, leaving just the “support vectors”. This means SVR requires less memory after training than KRR, and SVR is a bit faster than KRR when making predictions (although the difference in speed between SVR and KRR is often tiny).

Output of the KRR demo:

Begin scikit kernel ridge regression demo

Loading synthetic train (200) and test (40) data
Done

First three train X:
[-0.1660  0.4406 -0.9998 -0.3953 -0.7065]
[ 0.0776 -0.1616  0.3704 -0.5911  0.7562]
[-0.9452  0.3409 -0.1654  0.1174 -0.7192]

First three train y:
0.4840
0.1568
0.8054

Creating scikit KRR (with RBF) model
Setting gamma = 0.1000
Setting alpha = 0.0010
Done

Training scikit KRR model
Done.

Evaluating model

Accuracy (within 0.10) train = 0.9700
Accuracy (within 0.10) test = 0.9500

MSE train = 0.0001
MSE test = 0.0002

End demo

Output of the SVR demo:

Begin scikit SVR demo

Loading synthetic train (200) and test (40) data
Done

First three train X:
[-0.1660  0.4406 -0.9998 -0.3953 -0.7065]
[ 0.0776 -0.1616  0.3704 -0.5911  0.7562]
[-0.9452  0.3409 -0.1654  0.1174 -0.7192]

First three train y:
0.4840
0.1568
0.8054

Creating scikit SVR model
Setting gamma = 0.1000
Setting C = 10.0000
Setting epsilon = 0.0100
Done

Training SVR model
Done.

support vectors:
[  1   2   3   6   7  10  16  17  18  19  20  21  23  25
  26  32  37  39  40  41  42  43  46  47  48  52  57  58
  59  60  61  64  68  69  71  73  76  78  81  83  87  88
  89  90  92  93  94  95  97 100 101 106 109 110 112 118
 119 124 125 136 137 139 140 141 143 152 154 156 157 159
 161 163 164 165 167 169 170 171 173 176 179 180 181 185
 186 189 191 196 198 199]

Number support vectors = 90

Evaluating model

Accuracy (within 0.10) train = 0.9650
Accuracy (within 0.10) test = 0.9500

MSE train = 0.0001
MSE test = 0.0002

End demo

The KRR model stores all 200 training items, but SVR stores only 90 items. Does this matter? It depends on the scenario.



Kernel ridge regression and support vector regression are quite similar. During the golden age of pinball machines, there were several machines with a similar playing card theme.

Left: “Drop-a-Card” by Gottlieb (1971). A very well-knonw machine. About 2600 were produced. This was the last “short flipper”machine from Gottlieb. I played this game often at the UC Irvine Student Center when I was an undergraduate there.

Right: “Straight Flush” by Williams (1970). About 2400 were produced. I preferred the Williams style long flippers over the Gottlieb style short flippers.


The KRR demo program. Replace the “lt” in the accuracy() function with the less-than Boolean symbol (my blog editor chokes on symbols).

# krr_scikit.py
# kernel ridge regression on synthetic data

import numpy as np
from sklearn.kernel_ridge import KernelRidge

# KernelRidge(alpha=1, *, kernel='linear', gamma=None,
# degree=3, coef0=1, kernel_params=None)

# -----------------------------------------------------------

np.set_printoptions(precision=4, suppress=True,
  floatmode='fixed', linewidth=60)

# -----------------------------------------------------------

def accuracy(model, data_X, data_y, pct_close):
  n = len(data_X)
  n_correct = 0; n_wrong = 0
  for i in range(n):
    x = data_X[i].reshape(1,-1)
    y = data_y[i]
    y_pred = model.predict(x)[0]

    if np.abs(y - y_pred) "lt" np.abs(y * pct_close):
      n_correct += 1
    else: 
      n_wrong += 1
  return n_correct / (n_correct + n_wrong)

def mse(model, data_X, data_y):
  n = len(data_X)
  sum = 0.0
  for i in range(n):
    actual_y = data_y[i]
    pred_y = model.predict(data_X[i].reshape(1, -1))[0]
    diff = actual_y - pred_y
    sum += diff * diff
  return sum /n

# -----------------------------------------------------------
# -----------------------------------------------------------

print("\nBegin scikit kernel ridge regression demo ")

np.set_printoptions(precision=4, suppress=True,
    floatmode='fixed')

print("\nLoading synthetic train (200) and test (40) data ")
train_Xy = np.loadtxt(".\\Data\\synthetic_train_200.txt",
  usecols=[0,1,2,3,4,5], delimiter=",")
train_X = train_Xy[:,[0,1,2,3,4]]
train_y = train_Xy[:,5]

test_Xy = np.loadtxt(".\\Data\\synthetic_test_40.txt",
  usecols=[0,1,2,3,4,5], delimiter=",")
test_X = test_Xy[:,[0,1,2,3,4]]
test_y = test_Xy[:,5]
print("Done ")

print("\nFirst three train X: ")
for i in range(3):
  print(train_X[i])
print("\nFirst three train y: ")
for i in range(3):
  print("%0.4f " % train_y[i])

print("\nCreating scikit KRR (with RBF) model ")
gamma = 0.1000  # found by grid search below
alpha = 0.0010
print("Setting gamma = %0.4f " % gamma)
print("Setting alpha = %0.4f " % alpha)
model = KernelRidge(kernel='rbf', gamma=gamma, alpha=alpha)
print("Done ")

print("\nTraining scikit KRR model ")
model.fit(train_X, train_y)
print("Done. ")

print("\nEvaluating model ")
acc_train = accuracy(model, train_X, train_y, 0.10)
acc_test = accuracy(model, test_X, test_y, 0.10)
print("\nAccuracy (within 0.10) train = %0.4f " % \
  acc_train)
print("Accuracy (within 0.10) test = %0.4f " % \
  acc_test)

mse_train = mse(model, train_X, train_y)
mse_test = mse(model, test_X, test_y)
print("\nMSE train = %0.4f " % mse_train)
print("MSE test = %0.4f " % mse_test)

# gamma_vals = [0.001, 0.01, 0.05, 0.10, 1.0, 10.0]
# alpha_vals = [0.001, 0.01, 0.05, 0.10, 1.0, 10.0]

# for i in range(len(gamma_vals)):
#   for j in range(len(alpha_vals)):
#     print("\n============")
#     print("gamma = %0.4f " % gamma_vals[i])
#     print("alpha = %0.4f " % alpha_vals[j])
#     model = KernelRidge(kernel='rbf', 
#       gamma=gamma_vals[i], alpha=alpha_vals[j])
#     model.fit(train_X, train_y)
#     acc_train = accuracy(model, train_X, train_y, 0.10)
#     print("Accuracy (within 0.10) train = %0.4f " % \
#      acc_train)
#     acc_test = accuracy(model, test_X, test_y, 0.10)
#     print("Accuracy (within 0.10) test = %0.4f " % \
#      acc_test)

# KRR:
# gamma = 0.1000
# alpha = 0.0010
# Accuracy (within 0.10) train = 0.9700
# Accuracy (within 0.10) test = 0.9500

# SVR:
# gamma = 0.1000
# C = 10.0000
# epsilon = 0.0100
# Accuracy (within 0.10) train = 0.9650
# Accuracy (within 0.10) test = 0.9500

print("\nEnd demo ")

The SVR demo program. Replace the “lt” in the accuracy() function with the less-than Boolean symbol (my blog editor chokes on symbols).

# svr_scikit.py
# SVR on synthetic data

import numpy as np
from sklearn.svm import SVR

# SVR(*, kernel='rbf', degree=3, gamma='scale',
# coef0=0.0, tol=0.001, C=1.0, epsilon=0.1, shrinking=True,
# cache_size=200, verbose=False, max_iter=-1)

# -----------------------------------------------------------

np.set_printoptions(precision=4, suppress=True,
  floatmode='fixed', linewidth=60)

# -----------------------------------------------------------

def accuracy(model, data_X, data_y, pct_close):
  n = len(data_X)
  n_correct = 0; n_wrong = 0
  for i in range(n):
    x = data_X[i].reshape(1,-1)
    y = data_y[i]
    y_pred = model.predict(x)[0]

    if np.abs(y - y_pred) "lt" np.abs(y * pct_close):
      n_correct += 1
    else: 
      n_wrong += 1
  return n_correct / (n_correct + n_wrong)

def mse(model, data_X, data_y):
  n = len(data_X)
  sum = 0.0
  for i in range(n):
    actual_y = data_y[i]
    pred_y = model.predict(data_X[i].reshape(1, -1))[0]
    diff = actual_y - pred_y
    sum += diff * diff
  return sum /n

# -----------------------------------------------------------
# -----------------------------------------------------------

print("\nBegin scikit SVR demo ")

np.set_printoptions(precision=4, suppress=True,
    floatmode='fixed')

print("\nLoading synthetic train (200) and test (40) data ")
train_Xy = np.loadtxt(".\\Data\\synthetic_train_200.txt",
  usecols=[0,1,2,3,4,5], delimiter=",")
train_X = train_Xy[:,[0,1,2,3,4]]
train_y = train_Xy[:,5]

test_Xy = np.loadtxt(".\\Data\\synthetic_test_40.txt",
  usecols=[0,1,2,3,4,5], delimiter=",")
test_X = test_Xy[:,[0,1,2,3,4]]
test_y = test_Xy[:,5]
print("Done ")

print("\nFirst three train X: ")
for i in range(3):
  print(train_X[i])
print("\nFirst three train y: ")
for i in range(3):
  print("%0.4f " % train_y[i])

print("\nCreating scikit SVR model ")
gamma = 0.1000  # found by grid search (below)
C = 10.0000
epsilon = 0.0100
print("Setting gamma = %0.4f " % gamma)
print("Setting C = %0.4f " % C)
print("Setting epsilon = %0.4f " % epsilon)
model = SVR(kernel='rbf', gamma=gamma, C=C, epsilon=epsilon)
print("Done ")

print("\nTraining SVR model ")
model.fit(train_X, train_y)
print("Done. ")

print("\nsupport vectors: ")
print(model.support_)
print("\nNumber support vectors =  ")
print(len(model.support_))

print("\nEvaluating model ")
acc_train = accuracy(model, train_X, train_y, 0.10)
acc_test = accuracy(model, test_X, test_y, 0.10)
print("\nAccuracy (within 0.10) train = %0.4f " % \
  acc_train)
print("Accuracy (within 0.10) test = %0.4f " % \
  acc_test)

mse_train = mse(model, train_X, train_y)
mse_test = mse(model, test_X, test_y)
print("\nMSE train = %0.4f " % mse_train)
print("MSE test = %0.4f " % mse_test)

# gamma_vals = [0.01, 0.10, 1.0, 10.0]
# C_vals = [0.01, 0.10, 1.0, 10.0]
# epsilon_vals = [0.01, 0.10, 1.0, 10.0]

# for i in range(len(gamma_vals)):
#   for j in range(len(C_vals)):
#     for k in range(len(epsilon_vals)):
      # print("\n============")
      # print("gamma = %0.4f " % gamma_vals[i])
      # print("C = %0.4f " % C_vals[j])
      # print("epsilon = %0.4f " % epsilon_vals[k])
      # model = SVR(gamma=gamma_vals[i], C=C_vals[j],
      #  epsilon=epsilon_vals[k])
      # model.fit(train_X, train_y)
      # acc_train = accuracy(model, train_X, train_y, 0.10)
      # print("Accuracy (within 0.10) train = %0.4f " % \
      #  acc_train)
      # acc_test = accuracy(model, test_X, test_y, 0.10)
      # print("Accuracy (within 0.10) test = %0.4f " % \
      #  acc_test)

# SVR:
# gamma = 0.1000
# C = 10.0000
# epsilon = 0.0100
# Accuracy (within 0.10) train = 0.9650
# Accuracy (within 0.10) test = 0.9500

# KRR:
# gamma = 0.1000
# alpha = 0.0010
# Accuracy (within 0.10) train = 0.9700
# Accuracy (within 0.10) test = 0.9500

print("\nEnd demo ")

Training data:

# synthetic_train_200.txt
#
-0.1660,  0.4406, -0.9998, -0.3953, -0.7065,  0.4840
 0.0776, -0.1616,  0.3704, -0.5911,  0.7562,  0.1568
-0.9452,  0.3409, -0.1654,  0.1174, -0.7192,  0.8054
 0.9365, -0.3732,  0.3846,  0.7528,  0.7892,  0.1345
-0.8299, -0.9219, -0.6603,  0.7563, -0.8033,  0.7955
 0.0663,  0.3838, -0.3690,  0.3730,  0.6693,  0.3206
-0.9634,  0.5003,  0.9777,  0.4963, -0.4391,  0.7377
-0.1042,  0.8172, -0.4128, -0.4244, -0.7399,  0.4801
-0.9613,  0.3577, -0.5767, -0.4689, -0.0169,  0.6861
-0.7065,  0.1786,  0.3995, -0.7953, -0.1719,  0.5569
 0.3888, -0.1716, -0.9001,  0.0718,  0.3276,  0.2500
 0.1731,  0.8068, -0.7251, -0.7214,  0.6148,  0.3297
-0.2046, -0.6693,  0.8550, -0.3045,  0.5016,  0.2129
 0.2473,  0.5019, -0.3022, -0.4601,  0.7918,  0.2613
-0.1438,  0.9297,  0.3269,  0.2434, -0.7705,  0.5171
 0.1568, -0.1837, -0.5259,  0.8068,  0.1474,  0.3307
-0.9943,  0.2343, -0.3467,  0.0541,  0.7719,  0.5581
 0.2467, -0.9684,  0.8589,  0.3818,  0.9946,  0.1092
-0.6553, -0.7257,  0.8652,  0.3936, -0.8680,  0.7018
 0.8460,  0.4230, -0.7515, -0.9602, -0.9476,  0.1996
-0.9434, -0.5076,  0.7201,  0.0777,  0.1056,  0.5664
 0.9392,  0.1221, -0.9627,  0.6013, -0.5341,  0.1533
 0.6142, -0.2243,  0.7271,  0.4942,  0.1125,  0.1661
 0.4260,  0.1194, -0.9749, -0.8561,  0.9346,  0.2230
 0.1362, -0.5934, -0.4953,  0.4877, -0.6091,  0.3810
 0.6937, -0.5203, -0.0125,  0.2399,  0.6580,  0.1460
-0.6864, -0.9628, -0.8600, -0.0273,  0.2127,  0.5387
 0.9772,  0.1595, -0.2397,  0.1019,  0.4907,  0.1611
 0.3385, -0.4702, -0.8673, -0.2598,  0.2594,  0.2270
-0.8669, -0.4794,  0.6095, -0.6131,  0.2789,  0.4700
 0.0493,  0.8496, -0.4734, -0.8681,  0.4701,  0.3516
 0.8639, -0.9721, -0.5313,  0.2336,  0.8980,  0.1412
 0.9004,  0.1133,  0.8312,  0.2831, -0.2200,  0.1782
 0.0991,  0.8524,  0.8375, -0.2102,  0.9265,  0.2150
-0.6521, -0.7473, -0.7298,  0.0113, -0.9570,  0.7422
 0.6190, -0.3105,  0.8802,  0.1640,  0.7577,  0.1056
 0.6895,  0.8108, -0.0802,  0.0927,  0.5972,  0.2214
 0.1982, -0.9689,  0.1870, -0.1326,  0.6147,  0.1310
-0.3695,  0.7858,  0.1557, -0.6320,  0.5759,  0.3773
-0.1596,  0.3581,  0.8372, -0.9992,  0.9535,  0.2071
-0.2468,  0.9476,  0.2094,  0.6577,  0.1494,  0.4132
 0.1737,  0.5000,  0.7166,  0.5102,  0.3961,  0.2611
 0.7290, -0.3546,  0.3416, -0.0983, -0.2358,  0.1332
-0.3652,  0.2438, -0.1395,  0.9476,  0.3556,  0.4170
-0.6029, -0.1466, -0.3133,  0.5953,  0.7600,  0.4334
-0.4596, -0.4953,  0.7098,  0.0554,  0.6043,  0.2775
 0.1450,  0.4663,  0.0380,  0.5418,  0.1377,  0.2931
-0.8636, -0.2442, -0.8407,  0.9656, -0.6368,  0.7429
 0.6237,  0.7499,  0.3768,  0.1390, -0.6781,  0.2185
-0.5499,  0.1850, -0.3755,  0.8326,  0.8193,  0.4399
-0.4858, -0.7782, -0.6141, -0.0008,  0.4572,  0.4197
 0.7033, -0.1683,  0.2334, -0.5327, -0.7961,  0.1776
 0.0317, -0.0457, -0.6947,  0.2436,  0.0880,  0.3345
 0.5031, -0.5559,  0.0387,  0.5706, -0.9553,  0.3107
-0.3513,  0.7458,  0.6894,  0.0769,  0.7332,  0.3170
 0.2205,  0.5992, -0.9309,  0.5405,  0.4635,  0.3532
-0.4806, -0.4859,  0.2646, -0.3094,  0.5932,  0.3202
 0.9809, -0.3995, -0.7140,  0.8026,  0.0831,  0.1600
 0.9495,  0.2732,  0.9878,  0.0921,  0.0529,  0.1289
-0.9476, -0.6792,  0.4913, -0.9392, -0.2669,  0.5966
 0.7247,  0.3854,  0.3819, -0.6227, -0.1162,  0.1550
-0.5922, -0.5045, -0.4757,  0.5003, -0.0860,  0.5863
-0.8861,  0.0170, -0.5761,  0.5972, -0.4053,  0.7301
 0.6877, -0.2380,  0.4997,  0.0223,  0.0819,  0.1404
 0.9189,  0.6079, -0.9354,  0.4188, -0.0700,  0.1907
-0.1428, -0.7820,  0.2676,  0.6059,  0.3936,  0.2790
 0.5324, -0.3151,  0.6917, -0.1425,  0.6480,  0.1071
-0.8432, -0.9633, -0.8666, -0.0828, -0.7733,  0.7784
-0.9444,  0.5097, -0.2103,  0.4939, -0.0952,  0.6787
-0.0520,  0.6063, -0.1952,  0.8094, -0.9259,  0.4836
 0.5477, -0.7487,  0.2370, -0.9793,  0.0773,  0.1241
 0.2450,  0.8116,  0.9799,  0.4222,  0.4636,  0.2355
 0.8186, -0.1983, -0.5003, -0.6531, -0.7611,  0.1511
-0.4714,  0.6382, -0.3788,  0.9648, -0.4667,  0.5950
 0.0673, -0.3711,  0.8215, -0.2669, -0.1328,  0.2677
-0.9381,  0.4338,  0.7820, -0.9454,  0.0441,  0.5518
-0.3480,  0.7190,  0.1170,  0.3805, -0.0943,  0.4724
-0.9813,  0.1535, -0.3771,  0.0345,  0.8328,  0.5438
-0.1471, -0.5052, -0.2574,  0.8637,  0.8737,  0.3042
-0.5454, -0.3712, -0.6505,  0.2142, -0.1728,  0.5783
 0.6327, -0.6297,  0.4038, -0.5193,  0.1484,  0.1153
-0.5424,  0.3282, -0.0055,  0.0380, -0.6506,  0.6613
 0.1414,  0.9935,  0.6337,  0.1887,  0.9520,  0.2540
-0.9351, -0.8128, -0.8693, -0.0965, -0.2491,  0.7353
 0.9507, -0.6640,  0.9456,  0.5349,  0.6485,  0.1059
-0.0462, -0.9737, -0.2940, -0.0159,  0.4602,  0.2606
-0.0627, -0.0852, -0.7247, -0.9782,  0.5166,  0.2977
 0.0478,  0.5098, -0.0723, -0.7504, -0.3750,  0.3335
 0.0090,  0.3477,  0.5403, -0.7393, -0.9542,  0.4415
-0.9748,  0.3449,  0.3736, -0.1015,  0.8296,  0.4358
 0.2887, -0.9895, -0.0311,  0.7186,  0.6608,  0.2057
 0.1570, -0.4518,  0.1211,  0.3435, -0.2951,  0.3244
 0.7117, -0.6099,  0.4946, -0.4208,  0.5476,  0.1096
-0.2929, -0.5726,  0.5346, -0.3827,  0.4665,  0.2465
 0.4889, -0.5572, -0.5718, -0.6021, -0.7150,  0.2163
-0.7782,  0.3491,  0.5996, -0.8389, -0.5366,  0.6516
-0.5847,  0.8347,  0.4226,  0.1078, -0.3910,  0.6134
 0.8469,  0.4121, -0.0439, -0.7476,  0.9521,  0.1571
-0.6803, -0.5948, -0.1376, -0.1916, -0.7065,  0.7156
 0.2878,  0.5086, -0.5785,  0.2019,  0.4979,  0.2980
 0.2764,  0.1943, -0.4090,  0.4632,  0.8906,  0.2960
-0.8877,  0.6705, -0.6155, -0.2098, -0.3998,  0.7107
-0.8398,  0.8093, -0.2597,  0.0614, -0.0118,  0.6502
-0.8476,  0.0158, -0.4769, -0.2859, -0.7839,  0.7715
 0.5751, -0.7868,  0.9714, -0.6457,  0.1448,  0.1175
 0.4802, -0.7001,  0.1022, -0.5668,  0.5184,  0.1090
 0.4458, -0.6469,  0.7239, -0.9604,  0.7205,  0.0779
 0.5175,  0.4339,  0.9747, -0.4438, -0.9924,  0.2879
 0.8678,  0.7158,  0.4577,  0.0334,  0.4139,  0.1678
 0.5406,  0.5012,  0.2264, -0.1963,  0.3946,  0.2088
-0.9938,  0.5498,  0.7928, -0.5214, -0.7585,  0.7687
 0.7661,  0.0863, -0.4266, -0.7233, -0.4197,  0.1466
 0.2277, -0.3517, -0.0853, -0.1118,  0.6563,  0.1767
 0.3499, -0.5570, -0.0655, -0.3705,  0.2537,  0.1632
 0.7547, -0.1046,  0.5689, -0.0861,  0.3125,  0.1257
 0.8186,  0.2110,  0.5335,  0.0094, -0.0039,  0.1391
 0.6858, -0.8644,  0.1465,  0.8855,  0.0357,  0.1845
-0.4967,  0.4015,  0.0805,  0.8977,  0.2487,  0.4663
 0.6760, -0.9841,  0.9787, -0.8446, -0.3557,  0.1509
-0.1203, -0.4885,  0.6054, -0.0443, -0.7313,  0.4854
 0.8557,  0.7919, -0.0169,  0.7134, -0.1628,  0.2002
 0.0115, -0.6209,  0.9300, -0.4116, -0.7931,  0.4052
-0.7114, -0.9718,  0.4319,  0.1290,  0.5892,  0.3661
 0.3915,  0.5557, -0.1870,  0.2955, -0.6404,  0.2954
-0.3564, -0.6548, -0.1827, -0.5172, -0.1862,  0.4622
 0.2392, -0.4959,  0.5857, -0.1341, -0.2850,  0.2470
-0.3394,  0.3947, -0.4627,  0.6166, -0.4094,  0.5325
 0.7107,  0.7768, -0.6312,  0.1707,  0.7964,  0.2757
-0.1078,  0.8437, -0.4420,  0.2177,  0.3649,  0.4028
-0.3139,  0.5595, -0.6505, -0.3161, -0.7108,  0.5546
 0.4335,  0.3986,  0.3770, -0.4932,  0.3847,  0.1810
-0.2562, -0.2894, -0.8847,  0.2633,  0.4146,  0.4036
 0.2272,  0.2966, -0.6601, -0.7011,  0.0284,  0.2778
-0.0743, -0.1421, -0.0054, -0.6770, -0.3151,  0.3597
-0.4762,  0.6891,  0.6007, -0.1467,  0.2140,  0.4266
-0.4061,  0.7193,  0.3432,  0.2669, -0.7505,  0.6147
-0.0588,  0.9731,  0.8966,  0.2902, -0.6966,  0.4955
-0.0627, -0.1439,  0.1985,  0.6999,  0.5022,  0.3077
 0.1587,  0.8494, -0.8705,  0.9827, -0.8940,  0.4263
-0.7850,  0.2473, -0.9040, -0.4308, -0.8779,  0.7199
 0.4070,  0.3369, -0.2428, -0.6236,  0.4940,  0.2215
-0.0242,  0.0513, -0.9430,  0.2885, -0.2987,  0.3947
-0.5416, -0.1322, -0.2351, -0.0604,  0.9590,  0.3683
 0.1055,  0.7783, -0.2901, -0.5090,  0.8220,  0.2984
-0.9129,  0.9015,  0.1128, -0.2473,  0.9901,  0.4776
-0.9378,  0.1424, -0.6391,  0.2619,  0.9618,  0.5368
 0.7498, -0.0963,  0.4169,  0.5549, -0.0103,  0.1614
-0.2612, -0.7156,  0.4538, -0.0460, -0.1022,  0.3717
 0.7720,  0.0552, -0.1818, -0.4622, -0.8560,  0.1685
-0.4177,  0.0070,  0.9319, -0.7812,  0.3461,  0.3052
-0.0001,  0.5542, -0.7128, -0.8336, -0.2016,  0.3803
 0.5356, -0.4194, -0.5662, -0.9666, -0.2027,  0.1776
-0.2378,  0.3187, -0.8582, -0.6948, -0.9668,  0.5474
-0.1947, -0.3579,  0.1158,  0.9869,  0.6690,  0.2992
 0.3992,  0.8365, -0.9205, -0.8593, -0.0520,  0.3154
-0.0209,  0.0793,  0.7905, -0.1067,  0.7541,  0.1864
-0.4928, -0.4524, -0.3433,  0.0951, -0.5597,  0.6261
-0.8118,  0.7404, -0.5263, -0.2280,  0.1431,  0.6349
 0.0516, -0.8480,  0.7483,  0.9023,  0.6250,  0.1959
-0.3212,  0.1093,  0.9488, -0.3766,  0.3376,  0.2735
-0.3481,  0.5490, -0.3484,  0.7797,  0.5034,  0.4379
-0.5785, -0.9170, -0.3563, -0.9258,  0.3877,  0.4121
 0.3407, -0.1391,  0.5356,  0.0720, -0.9203,  0.3458
-0.3287, -0.8954,  0.2102,  0.0241,  0.2349,  0.3247
-0.1353,  0.6954, -0.0919, -0.9692,  0.7461,  0.3338
 0.9036, -0.8982, -0.5299, -0.8733, -0.1567,  0.1187
 0.7277, -0.8368, -0.0538, -0.7489,  0.5458,  0.0830
 0.9049,  0.8878,  0.2279,  0.9470, -0.3103,  0.2194
 0.7957, -0.1308, -0.5284,  0.8817,  0.3684,  0.2172
 0.4647, -0.4931,  0.2010,  0.6292, -0.8918,  0.3371
-0.7390,  0.6849,  0.2367,  0.0626, -0.5034,  0.7039
-0.1567, -0.8711,  0.7940, -0.5932,  0.6525,  0.1710
 0.7635, -0.0265,  0.1969,  0.0545,  0.2496,  0.1445
 0.7675,  0.1354, -0.7698, -0.5460,  0.1920,  0.1728
-0.5211, -0.7372, -0.6763,  0.6897,  0.2044,  0.5217
 0.1913,  0.1980,  0.2314, -0.8816,  0.5006,  0.1998
 0.8964,  0.0694, -0.6149,  0.5059, -0.9854,  0.1825
 0.1767,  0.7104,  0.2093,  0.6452,  0.7590,  0.2832
-0.3580, -0.7541,  0.4426, -0.1193, -0.7465,  0.5657
-0.5996,  0.5766, -0.9758, -0.3933, -0.9572,  0.6800
 0.9950,  0.1641, -0.4132,  0.8579,  0.0142,  0.2003
-0.4717, -0.3894, -0.2567, -0.5111,  0.1691,  0.4266
 0.3917, -0.8561,  0.9422,  0.5061,  0.6123,  0.1212
-0.0366, -0.1087,  0.3449, -0.1025,  0.4086,  0.2475
 0.3633,  0.3943,  0.2372, -0.6980,  0.5216,  0.1925
-0.5325, -0.6466, -0.2178, -0.3589,  0.6310,  0.3568
 0.2271,  0.5200, -0.1447, -0.8011, -0.7699,  0.3128
 0.6415,  0.1993,  0.3777, -0.0178, -0.8237,  0.2181
-0.5298, -0.0768, -0.6028, -0.9490,  0.4588,  0.4356
 0.6870, -0.1431,  0.7294,  0.3141,  0.1621,  0.1632
-0.5985,  0.0591,  0.7889, -0.3900,  0.7419,  0.2945
 0.3661,  0.7984, -0.8486,  0.7572, -0.6183,  0.3449
 0.6995,  0.3342, -0.3113, -0.6972,  0.2707,  0.1712
 0.2565,  0.9126,  0.1798, -0.6043, -0.1413,  0.2893
-0.3265,  0.9839, -0.2395,  0.9854,  0.0376,  0.4770
 0.2690, -0.1722,  0.9818,  0.8599, -0.7015,  0.3954
-0.2102, -0.0768,  0.1219,  0.5607, -0.0256,  0.3949
 0.8216, -0.9555,  0.6422, -0.6231,  0.3715,  0.0801
-0.2896,  0.9484, -0.7545, -0.6249,  0.7789,  0.4370
-0.9985, -0.5448, -0.7092, -0.5931,  0.7926,  0.5402

Test data:

# synthetic_test_40.txt
#
 0.7462,  0.4006, -0.0590,  0.6543, -0.0083,  0.1935
 0.8495, -0.2260, -0.0142, -0.4911,  0.7699,  0.1078
-0.2335, -0.4049,  0.4352, -0.6183, -0.7636,  0.5088
 0.1810, -0.5142,  0.2465,  0.2767, -0.3449,  0.3136
-0.8650,  0.7611, -0.0801,  0.5277, -0.4922,  0.7140
-0.2358, -0.7466, -0.5115, -0.8413, -0.3943,  0.4533
 0.4834,  0.2300,  0.3448, -0.9832,  0.3568,  0.1360
-0.6502, -0.6300,  0.6885,  0.9652,  0.8275,  0.3046
-0.3053,  0.5604,  0.0929,  0.6329, -0.0325,  0.4756
-0.7995,  0.0740, -0.2680,  0.2086,  0.9176,  0.4565
-0.2144, -0.2141,  0.5813,  0.2902, -0.2122,  0.4119
-0.7278, -0.0987, -0.3312, -0.5641,  0.8515,  0.4438
 0.3793,  0.1976,  0.4933,  0.0839,  0.4011,  0.1905
-0.8568,  0.9573, -0.5272,  0.3212, -0.8207,  0.7415
-0.5785,  0.0056, -0.7901, -0.2223,  0.0760,  0.5551
 0.0735, -0.2188,  0.3925,  0.3570,  0.3746,  0.2191
 0.1230, -0.2838,  0.2262,  0.8715,  0.1938,  0.2878
 0.4792, -0.9248,  0.5295,  0.0366, -0.9894,  0.3149
-0.4456,  0.0697,  0.5359, -0.8938,  0.0981,  0.3879
 0.8629, -0.8505, -0.4464,  0.8385,  0.5300,  0.1769
 0.1995,  0.6659,  0.7921,  0.9454,  0.9970,  0.2330
-0.0249, -0.3066, -0.2927, -0.4923,  0.8220,  0.2437
 0.4513, -0.9481, -0.0770, -0.4374, -0.9421,  0.2879
-0.3405,  0.5931, -0.3507, -0.3842,  0.8562,  0.3987
 0.9538,  0.0471,  0.9039,  0.7760,  0.0361,  0.1706
-0.0887,  0.2104,  0.9808,  0.5478, -0.3314,  0.4128
-0.8220, -0.6302,  0.0537, -0.1658,  0.6013,  0.4306
-0.4123, -0.2880,  0.9074, -0.0461, -0.4435,  0.5144
 0.0060,  0.2867, -0.7775,  0.5161,  0.7039,  0.3599
-0.7968, -0.5484,  0.9426, -0.4308,  0.8148,  0.2979
 0.7811,  0.8450, -0.6877,  0.7594,  0.2640,  0.2362
-0.6802, -0.1113, -0.8325, -0.6694, -0.6056,  0.6544
 0.3821,  0.1476,  0.7466, -0.5107,  0.2592,  0.1648
 0.7265,  0.9683, -0.9803, -0.4943, -0.5523,  0.2454
-0.9049, -0.9797, -0.0196, -0.9090, -0.4433,  0.6447
-0.4607,  0.1811, -0.2389,  0.4050, -0.0078,  0.5229
 0.2664, -0.2932, -0.4259, -0.7336,  0.8742,  0.1834
-0.4507,  0.1029, -0.6294, -0.1158, -0.6294,  0.6081
 0.8948, -0.0124,  0.9278,  0.2899, -0.0314,  0.1534
-0.1323, -0.8813, -0.0146, -0.0697,  0.6135,  0.2386
This entry was posted in Machine Learning, Scikit. Bookmark the permalink.

Leave a Reply