The goal of a machine learning regression problem is to predict a single numeric value. Quadratic regression is an enhanced form of basic linear regression. One of several ways to train a quadratic regression model is to use left pseudo-inverse via normal equations training. Before I go any further, let me emphasize that this training technique is practical only for small datasets (like under 200 rows).
Suppose there are five predictors, (x0, x1, x2, x3, x4). The prediction equation for basic linear regression is:
y’ = (w0 * x0) + (w1 * x1) + (w2 * x2) + (w3 * x3) + (w4 * x4) + b
The wi are model weights (aka coefficients), and b is the model bias (aka intercept). The values of the weights and the bias must be determined by training, so that predicted y’ values are close to the known, correct y values in a set of training data.
The prediction equation for quadratic regression with five predictors is:
y’ = (w0 * x0) + (w1 * x1) + (w2 * x2) + (w3 * x3) + (w4 * x4) +
(w5 * x0*x0) + (w6 * x1*x1) + (w7 * x2*x2) +
(w8 * x3*x3) + (w9 * x4*x4) +
(w10 * x0*x1) + (w11 * x0*x2) + (w12 * x0*x3) + (w13 * x0*x4) +
(w14 * x1*x2) + (w15 * x1*x3) + (w16 * x1*x4) +
(w17 * x2*x3) + (w18 * x2*x4) +
(w19 * x3*x4)
+ b
The squared (“quadratic”) xi^2 terms handle non-linear structure. If there are n predictors, there are also n squared terms. The xi * xj terms between all possible pairs of original predictors handle interactions between predictors. If there are n predictors, there (n * (n-1)) / 2 interaction terms.
Training is the process of finding values for the weights and the bias so that the model predicts well. There are several different training techniques, including relaxed Moore-Penrose pseudo-inverse training, stochastic gradient descent training, L-BFGS training, and others. This blog post shows a training technique called left pseudo-inverse via normal equations with Cholesky inverse. It is applicable only for small datasets.
There is a lot of inconsistency with naming. Because “left pseudo-inverse via normal equations with Cholesky inverse” is so wordy, the technique is often called just pseudo-inverse (which is ambiguous because there are several forms of pseudo-inverse training), or left pseudo-inverse (ambiguous because that could also refer to relaxed Moore-Penrose pseudo-inverse), or closed form training (also ambiguous), and several other terms. I’ll call the technique left pseudo-inverse from here on.
Each quadratic regression training technique has pros and cons related to implementation difficulty, accuracy, and robustness. But when left pseudo-inverse training works, it is often my technique of choice because it requires no parameters (such as a learning rate needed by SGD training), and it is relatively easy to implement (dramatically easier than relaxed Moore-Penrose pseudo-inverse), and it is robust except for very unusual datasets.
The math equation for left pseudo-inverse training is w = inv(Xt * X) * Xt * y where w is a vector that holds the weights and bias you are looking for, X is a design matrix with the predictor values with a leading column of 1s which handle the bias term, Xt is the transpose of X, inv() is any matrix inverse function, y is a vector of target y values from the training data, and * is matrix-to-matrix or matrix-to-vector multiplication.
Because Xt * X has a special form called square symmetric positive definite, instead of using a general purpose matrix inverse function to compute inv(Xt * X), it’s possible to use the simpler, specialized Cholesky inverse algorithm.
For my demo, I used one of my standard datasets. The data looks like:
-0.1660, 0.4406, -0.9998, -0.3953, -0.7065, 0.4840 0.0776, -0.1616, 0.3704, -0.5911, 0.7562, 0.1568 -0.9452, 0.3409, -0.1654, 0.1174, -0.7192, 0.8054 0.9365, -0.3732, 0.3846, 0.7528, 0.7892, 0.1345 . . .
The first five values on each line are the x predictors. The last value on each line is the target y variable to predict. The data is synthetic, and was generated by a 5-10-1 neural network with random weights and biases. There are 200 training items and 40 test items.
The output of my demo is:
Begin C# quadratic regression with left pseudo-inverse (Cholesky) training Loading synthetic train (200) and test (40) data Done First three train X: -0.1660 0.4406 -0.9998 -0.3953 -0.7065 0.0776 -0.1616 0.3704 -0.5911 0.7562 -0.9452 0.3409 -0.1654 0.1174 -0.7192 First three train y: 0.4840 0.1568 0.8054 Creating quadratic regression model Starting left pseudo-inverse training Done Model base weights: -0.2630 0.0354 -0.0421 0.0341 -0.1124 Model quadratic weights: 0.0655 0.0194 0.0051 0.0047 0.0243 Model interaction weights: 0.0043 0.0249 0.0071 0.1081 -0.0012 -0.0093 0.0362 0.0085 -0.0568 0.0016 Model bias/intercept: 0.3220 Evaluating model Accuracy train (within 0.10) = 0.8850 Accuracy test (within 0.10) = 0.9250 MSE train = 0.0003 MSE test = 0.0005 Predicting for x = -0.1660 0.4406 -0.9998 -0.3953 -0.7065 Predicted y = 0.4843 End demo
The model accuracy of 88.50% on the training data (177 out of 200 correct) and 92.50% on the test data (37 out of 40 correct) is very good compared to other regression techniques. A prediction is scored as correct if it’s within 10% of the true target y value. Quadratic regression has a good balance between predictive accuracy and interpretability.
The single major weakness of using left pseudo-inverse via normal equations for training a quadratic regression model is computing the Xt * X term. Suppose the training data X matrix has size 1000 rows by 10 columns. The resulting Xt * X matrix has a small shape of just 10-by-10. This is great but computing Xt * X requires approximately 1,000 * 10 * 10 = 100,000 multiplications and about the same number of additions. If there are many small values, or many large values in X, the Xt * X operation could fail due to arithmetic underflow or overflow. In general, it’s not possible to determine if left pseudo-inverse training will work or not, other than by just trying it.
Quadratic regression was developed in the 1950s. It is often used in a hybrid approach, combined with another technique such as nearest neighbors regression. Two of my favorite science fiction movies of the 1950s feature spaceships that are sort of a hybrid rocket and airplane.
Left: In “When Worlds Collide” (1951), a rogue star and its associated planet, Zyra, are headed for collision with Earth. A space ark is constructed to carry 45 people to Zyra. The plan succeeds. Earth is destroyed but humanity makes it to a new start on Zyra. This movie won the Academy Award for Best Special Effects. I give this movie a personal A- grade.
Right: In “20 Million Miles to Earth” (1957), a secret U.S. mission to Venus returns to Earth but crash lands off the coast of Italy. Two crewmen are injured but survive. The ship also carried a small lizard-like Venusian creature — that quickly grows to dinosaur size and runs amok. The creature makes it to the Colosseum but it is killed by a bazooka shot. I like this movie a lot but am always sad when I watch the scene where the creature kills a circus elephant. I give this movie my personal B+ grade (it would be an A- except for the elephant).
Demo program. Replace “lt” (less than), “gt”, “lte”, “gte” with Boolean operator symbols. (My blog editor chokes on symbols).
using System;
using System.IO;
using System.Collections.Generic;
namespace QuadraticRegressionLeftPinv
{
internal class QuadraticRegressionProgram
{
static void Main(string[] args)
{
Console.WriteLine("\nBegin C# quadratic regression" +
" with left pseudo-inverse (Cholesky) training ");
// 1. load data
Console.WriteLine("\nLoading synthetic train" +
" (200) and test (40) data");
string trainFile =
"..\\..\\..\\Data\\synthetic_train_200.txt";
int[] colsX = new int[] { 0, 1, 2, 3, 4 };
double[][] trainX =
Utils.MatLoad(trainFile, colsX, ',', "#");
double[] trainY =
Utils.MatToVec(Utils.MatLoad(trainFile,
new int[] { 5 }, ',', "#"));
string testFile =
"..\\..\\..\\Data\\synthetic_test_40.txt";
double[][] testX =
Utils.MatLoad(testFile, colsX, ',', "#");
double[] testY =
Utils.MatToVec(Utils.MatLoad(testFile,
new int[] { 5 }, ',', "#"));
Console.WriteLine("Done ");
Console.WriteLine("\nFirst three train X: ");
for (int i = 0; i "lt" 3; ++i)
Utils.VecShow(trainX[i], 4, 8);
Console.WriteLine("\nFirst three train y: ");
for (int i = 0; i "lt" 3; ++i)
Console.WriteLine(trainY[i].ToString("F4").
PadLeft(8));
// 2. create and train model
Console.WriteLine("\nCreating quadratic " +
"regression model ");
QuadraticRegressor model = new QuadraticRegressor();
Console.WriteLine("\nStarting left pseudo-inverse " +
"training ");
model.TrainLeftPinv(trainX, trainY);
Console.WriteLine("Done ");
// 3. show model weights
Console.WriteLine("\nModel base weights: ");
int dim = trainX[0].Length;
for (int i = 0; i "lt" dim; ++i)
Console.Write(model.weights[i].
ToString("F4").PadLeft(8));
Console.WriteLine("");
Console.WriteLine("\nModel quadratic weights: ");
for (int i = dim; i "lt" dim + dim; ++i)
Console.Write(model.weights[i].
ToString("F4").PadLeft(8));
Console.WriteLine("");
Console.WriteLine("\nModel interaction weights: ");
for (int i = dim + dim; i "lt"
model.weights.Length; ++i)
{
Console.Write(model.weights[i].
ToString("F4").PadLeft(8));
if (i "gt" dim + dim && i % dim == 0)
Console.WriteLine("");
}
Console.WriteLine("");
Console.WriteLine("\nModel bias/intercept: " +
model.bias.ToString("F4").PadLeft(8));
// 4. evaluate model
Console.WriteLine("\nEvaluating model ");
double accTrain = model.Accuracy(trainX, trainY, 0.10);
Console.WriteLine("Accuracy train (within 0.10) = " +
accTrain.ToString("F4"));
double accTest = model.Accuracy(testX, testY, 0.10);
Console.WriteLine("Accuracy test (within 0.10) = " +
accTest.ToString("F4"));
double mseTrain = model.MSE(trainX, trainY);
Console.WriteLine("\nMSE train = " +
mseTrain.ToString("F4"));
double mseTest = model.MSE(testX, testY);
Console.WriteLine("MSE test = " +
mseTest.ToString("F4"));
// 5. use model
double[] x = trainX[0];
Console.WriteLine("\nPredicting for x = ");
Utils.VecShow(x, 4, 9);
double predY = model.Predict(x);
Console.WriteLine("\nPredicted y = " +
predY.ToString("F4"));
// 6. TODO: implement model Save() and Load()
Console.WriteLine("\nEnd demo ");
Console.ReadLine();
} // Main
} // class Program
// ========================================================
public class QuadraticRegressor
{
public double[] weights; // regular, quad, interactions
public double bias;
private Random rnd; // not used w/ left Pinv training
public QuadraticRegressor(int seed = 0)
{
this.weights = new double[0]; // empty, but not null
this.bias = 0; // dummy value
this.rnd = new Random(seed);
}
// ------------------------------------------------------
public void TrainLeftPinv(double[][] trainX,
double[] trainY)
{
// w = inv(Xt * X) * Xt * trainY
// = left pinv * trainY
int nRows = trainX.Length; // not used
int dim = trainX[0].Length;
int nInteractions = (dim * (dim - 1)) / 2;
this.weights = new double[dim + dim + nInteractions];
// add quadratic terms, and leading column of 1s
double[][] X = Utils.MatAugment(trainX);
double[][] Xt = Utils.MatTranspose(X);
double[][] XtX = Utils.MatProd(Xt, X);
// condition/regularize before inverse
for (int i = 0; i "lt" XtX.Length; ++i)
XtX[i][i] += 1.0e-8; // could parameterize as alpha
// XtX is square symmetric positive definite
double[][] invXtX = Utils.MatInvCholesky(XtX);
double[][] leftPinv = Utils.MatProd(invXtX, Xt);
double[] biasAndWts =
Utils.MatVecProd(leftPinv, trainY);
// extract bias and wts into model
this.bias = biasAndWts[0]; // bias is at [0]
for (int i = 1; i "lt" biasAndWts.Length; ++i)
this.weights[i - 1] = biasAndWts[i];
return;
}
// ------------------------------------------------------
public double Predict(double[] x)
{
int dim = x.Length;
double result = 0.0;
int p = 0; // points into this.weights
for (int i = 0; i "lt" dim; ++i) // regular
result += x[i] * this.weights[p++];
// generate quadratic terms on-the-fly
for (int i = 0; i "lt" dim; ++i) // quadratic
result += x[i] * x[i] * this.weights[p++];
for (int i = 0; i "lt" dim - 1; ++i) // interactions
for (int j = i + 1; j "lt" dim; ++j)
result += x[i] * x[j] * this.weights[p++];
result += this.bias;
return result;
}
// ------------------------------------------------------
public double Accuracy(double[][] dataX, double[] dataY,
double pctClose)
{
int numCorrect = 0; int numWrong = 0;
for (int i = 0; i "lt" dataX.Length; ++i)
{
double actualY = dataY[i];
double predY = this.Predict(dataX[i]);
if (Math.Abs(predY - actualY) "lt"
Math.Abs(pctClose * actualY))
++numCorrect;
else
++numWrong;
}
return (numCorrect * 1.0) / (numWrong + numCorrect);
}
// ------------------------------------------------------
public double MSE(double[][] dataX,
double[] dataY)
{
int n = dataX.Length;
double sum = 0.0;
for (int i = 0; i "lt" n; ++i)
{
double actualY = dataY[i];
double predY = this.Predict(dataX[i]);
sum += (actualY - predY) * (actualY - predY);
}
return sum / n;
}
} // class QuadraticRegressor
// ========================================================
public class Utils
{
// matrix and vector helpers, including Cholesky
public static double[][] MatLoad(string fn,
int[] usecols, char sep, string comment)
{
List"lt"double[]"gt" result =
new List"lt"double[]"gt"();
string line = "";
FileStream ifs = new FileStream(fn, FileMode.Open);
StreamReader sr = new StreamReader(ifs);
while ((line = sr.ReadLine()) != null)
{
if (line.StartsWith(comment) == true)
continue;
string[] tokens = line.Split(sep);
List"lt"double"gt" lst = new List"lt"double"gt"();
for (int j = 0; j "lt" usecols.Length; ++j)
lst.Add(double.Parse(tokens[usecols[j]]));
double[] row = lst.ToArray();
result.Add(row);
}
sr.Close(); ifs.Close();
return result.ToArray();
}
// ------------------------------------------------------
public static double[] MatToVec(double[][] M)
{
int nRows = M.Length;
int nCols = M[0].Length;
double[] result = new double[nRows * nCols];
int k = 0;
for (int i = 0; i "lt" nRows; ++i)
for (int j = 0; j "lt" nCols; ++j)
result[k++] = M[i][j];
return result;
}
// ------------------------------------------------------
public static void VecShow(double[] vec, int dec,
int wid)
{
for (int i = 0; i "lt" vec.Length; ++i)
Console.Write(vec[i].ToString("F" + dec).
PadLeft(wid));
Console.WriteLine("");
}
// ------------------------------------------------------
public static double[][] MatAugment(double[][] trainX)
{
// add quadratic terms, and
// design matrix: add leading col of 1.0s
int nRows = trainX.Length; // src and dest
int dim = trainX[0].Length;
int nInteractions = dim * (dim - 1) / 2;
int nColsDest = 1 + dim + dim + nInteractions;
double[][] result = new double[nRows][];
for (int i = 0; i "lt" nRows; i++)
result[i] = new double[nColsDest];
for (int i = 0; i "lt" nRows; ++i)
{
int p = 0; // points to column of result
result[i][p++] = 1.0; // leading 1.0
for (int j = 0; j "lt" dim; ++j) // base
result[i][p++] = trainX[i][j];
for (int j = 0; j "lt" dim; ++j) // quadratic
result[i][p++] = trainX[i][j] * trainX[i][j];
for (int j = 0; j "lt" nInteractions - 1; ++j)
for (int k = j + 1; k "lt" dim; ++k)
result[i][p++] = trainX[i][j] * trainX[i][k];
}
return result;
}
// ------------------------------------------------------
public static double[] MatVecProd(double[][] M,
double[] v)
{
// return a regular vector
int nRows = M.Length;
int nCols = M[0].Length;
int n = v.Length;
if (nCols != n)
throw new Exception("non-comform in MatVecProd");
double[] result = new double[nRows];
for (int i = 0; i "lt" nRows; ++i)
for (int k = 0; k "lt" nCols; ++k)
result[i] += M[i][k] * v[k];
return result;
}
// ------------------------------------------------------
public static double[][] MatInvCholesky(double[][] A)
{
// A must be square symmetric positive definite
// inv(A) = inv(L * Lt) = inv(Lt) * inv(L)
// calls MatDecompCholesky, MatTranspose,
// MatInvLowerTri, MatInvUpperTri, MatProd
// MatIdentity, MatMake
double[][] L = MatDecompCholesky(A);
double[][] Lt = MatTranspose(L);
double[][] invL = MatInvLowerTri(L);
double[][] invLt = MatInvUpperTri(Lt);
double[][] result = MatProd(invLt, invL);
return result;
}
// ------------------------------------------------------
public static double[][] MatInvLowerTri(double[][] L)
{
// inverse of lower triangular non-fancy version
int n = L.Length; // must be square matrix
double[][] result = MatIdentity(n);
for (int k = 0; k "lt" n; ++k)
{
for (int j = 0; j "lt" n; ++j)
{
for (int i = 0; i "lt" k; ++i)
{
result[k][j] -= result[i][j] * L[k][i];
}
result[k][j] /= L[k][k];
}
}
return result;
}
// ------------------------------------------------------
public static double[][] MatInvUpperTri(double[][] U)
{
int n = U.Length; // must be square matrix
double[][] result = MatIdentity(n);
for (int k = 0; k "lt" n; ++k)
{
for (int j = 0; j "lt" n; ++j)
{
for (int i = 0; i "lt" k; ++i)
{
result[j][k] -= result[j][i] * U[i][k];
}
result[j][k] /= U[k][k];
}
}
return result;
}
// ------------------------------------------------------
public static double[][] MatDecompCholesky(double[][] M)
{
// Cholesky decomposition (Banachiewicz algorithm)
// M is square, symmetric, positive definite
// (conditioned too)
int n = M.Length;
double[][] result = MatMake(n, n); // all 0.0
for (int i = 0; i "lt" n; ++i)
{
for (int j = 0; j "lte" i; ++j)
{
double sum = 0.0;
for (int k = 0; k "lt" j; ++k)
sum += result[i][k] * result[j][k];
if (i == j)
{
double tmp = M[i][i] - sum;
if (tmp "lt" 0.0)
throw new
Exception("MatDecompCholesky fatal");
result[i][j] = Math.Sqrt(tmp);
}
else
{
if (result[j][j] == 0.0)
throw new
Exception("MatDecompCholesky fatal ");
result[i][j] =
(1.0 / result[j][j] * (M[i][j] - sum));
}
} // j
} // i
return result;
} // MatDecompCholesky
// ------------------------------------------------------
public static double[][] MatIdentity(int n)
{
double[][] result = MatMake(n, n);
for (int i = 0; i "lt" n; ++i)
result[i][i] = 1.0;
return result;
}
// ------------------------------------------------------
public static double[][] MatMake(int nRows, int nCols)
{
double[][] result = new double[nRows][];
for (int i = 0; i "lt" nRows; ++i)
result[i] = new double[nCols];
return result;
}
// ------------------------------------------------------
public static double[][] MatTranspose(double[][] m)
{
int nr = m.Length;
int nc = m[0].Length;
double[][] result = MatMake(nc, nr); // note
for (int i = 0; i "lt" nr; ++i)
for (int j = 0; j "lt" nc; ++j)
result[j][i] = m[i][j];
return result;
}
// ------------------------------------------------------
public static double[][] MatProd(double[][] A,
double[][] B)
{
int aRows = A.Length;
int aCols = A[0].Length;
int bRows = B.Length;
int bCols = B[0].Length;
if (aCols != bRows)
throw new Exception("Non-conformable matrices");
double[][] result = MatMake(aRows, bCols);
for (int i = 0; i "lt" aRows; ++i) // each row of A
for (int j = 0; j "lt" bCols; ++j) // each col of B
for (int k = 0; k "lt" aCols; ++k)
result[i][j] += A[i][k] * B[k][j];
return result;
}
// ------------------------------------------------------
} // class Utils
// ========================================================
} // ns
Training data:
# synthetic_train_200.txt # -0.1660, 0.4406, -0.9998, -0.3953, -0.7065, 0.4840 0.0776, -0.1616, 0.3704, -0.5911, 0.7562, 0.1568 -0.9452, 0.3409, -0.1654, 0.1174, -0.7192, 0.8054 0.9365, -0.3732, 0.3846, 0.7528, 0.7892, 0.1345 -0.8299, -0.9219, -0.6603, 0.7563, -0.8033, 0.7955 0.0663, 0.3838, -0.3690, 0.3730, 0.6693, 0.3206 -0.9634, 0.5003, 0.9777, 0.4963, -0.4391, 0.7377 -0.1042, 0.8172, -0.4128, -0.4244, -0.7399, 0.4801 -0.9613, 0.3577, -0.5767, -0.4689, -0.0169, 0.6861 -0.7065, 0.1786, 0.3995, -0.7953, -0.1719, 0.5569 0.3888, -0.1716, -0.9001, 0.0718, 0.3276, 0.2500 0.1731, 0.8068, -0.7251, -0.7214, 0.6148, 0.3297 -0.2046, -0.6693, 0.8550, -0.3045, 0.5016, 0.2129 0.2473, 0.5019, -0.3022, -0.4601, 0.7918, 0.2613 -0.1438, 0.9297, 0.3269, 0.2434, -0.7705, 0.5171 0.1568, -0.1837, -0.5259, 0.8068, 0.1474, 0.3307 -0.9943, 0.2343, -0.3467, 0.0541, 0.7719, 0.5581 0.2467, -0.9684, 0.8589, 0.3818, 0.9946, 0.1092 -0.6553, -0.7257, 0.8652, 0.3936, -0.8680, 0.7018 0.8460, 0.4230, -0.7515, -0.9602, -0.9476, 0.1996 -0.9434, -0.5076, 0.7201, 0.0777, 0.1056, 0.5664 0.9392, 0.1221, -0.9627, 0.6013, -0.5341, 0.1533 0.6142, -0.2243, 0.7271, 0.4942, 0.1125, 0.1661 0.4260, 0.1194, -0.9749, -0.8561, 0.9346, 0.2230 0.1362, -0.5934, -0.4953, 0.4877, -0.6091, 0.3810 0.6937, -0.5203, -0.0125, 0.2399, 0.6580, 0.1460 -0.6864, -0.9628, -0.8600, -0.0273, 0.2127, 0.5387 0.9772, 0.1595, -0.2397, 0.1019, 0.4907, 0.1611 0.3385, -0.4702, -0.8673, -0.2598, 0.2594, 0.2270 -0.8669, -0.4794, 0.6095, -0.6131, 0.2789, 0.4700 0.0493, 0.8496, -0.4734, -0.8681, 0.4701, 0.3516 0.8639, -0.9721, -0.5313, 0.2336, 0.8980, 0.1412 0.9004, 0.1133, 0.8312, 0.2831, -0.2200, 0.1782 0.0991, 0.8524, 0.8375, -0.2102, 0.9265, 0.2150 -0.6521, -0.7473, -0.7298, 0.0113, -0.9570, 0.7422 0.6190, -0.3105, 0.8802, 0.1640, 0.7577, 0.1056 0.6895, 0.8108, -0.0802, 0.0927, 0.5972, 0.2214 0.1982, -0.9689, 0.1870, -0.1326, 0.6147, 0.1310 -0.3695, 0.7858, 0.1557, -0.6320, 0.5759, 0.3773 -0.1596, 0.3581, 0.8372, -0.9992, 0.9535, 0.2071 -0.2468, 0.9476, 0.2094, 0.6577, 0.1494, 0.4132 0.1737, 0.5000, 0.7166, 0.5102, 0.3961, 0.2611 0.7290, -0.3546, 0.3416, -0.0983, -0.2358, 0.1332 -0.3652, 0.2438, -0.1395, 0.9476, 0.3556, 0.4170 -0.6029, -0.1466, -0.3133, 0.5953, 0.7600, 0.4334 -0.4596, -0.4953, 0.7098, 0.0554, 0.6043, 0.2775 0.1450, 0.4663, 0.0380, 0.5418, 0.1377, 0.2931 -0.8636, -0.2442, -0.8407, 0.9656, -0.6368, 0.7429 0.6237, 0.7499, 0.3768, 0.1390, -0.6781, 0.2185 -0.5499, 0.1850, -0.3755, 0.8326, 0.8193, 0.4399 -0.4858, -0.7782, -0.6141, -0.0008, 0.4572, 0.4197 0.7033, -0.1683, 0.2334, -0.5327, -0.7961, 0.1776 0.0317, -0.0457, -0.6947, 0.2436, 0.0880, 0.3345 0.5031, -0.5559, 0.0387, 0.5706, -0.9553, 0.3107 -0.3513, 0.7458, 0.6894, 0.0769, 0.7332, 0.3170 0.2205, 0.5992, -0.9309, 0.5405, 0.4635, 0.3532 -0.4806, -0.4859, 0.2646, -0.3094, 0.5932, 0.3202 0.9809, -0.3995, -0.7140, 0.8026, 0.0831, 0.1600 0.9495, 0.2732, 0.9878, 0.0921, 0.0529, 0.1289 -0.9476, -0.6792, 0.4913, -0.9392, -0.2669, 0.5966 0.7247, 0.3854, 0.3819, -0.6227, -0.1162, 0.1550 -0.5922, -0.5045, -0.4757, 0.5003, -0.0860, 0.5863 -0.8861, 0.0170, -0.5761, 0.5972, -0.4053, 0.7301 0.6877, -0.2380, 0.4997, 0.0223, 0.0819, 0.1404 0.9189, 0.6079, -0.9354, 0.4188, -0.0700, 0.1907 -0.1428, -0.7820, 0.2676, 0.6059, 0.3936, 0.2790 0.5324, -0.3151, 0.6917, -0.1425, 0.6480, 0.1071 -0.8432, -0.9633, -0.8666, -0.0828, -0.7733, 0.7784 -0.9444, 0.5097, -0.2103, 0.4939, -0.0952, 0.6787 -0.0520, 0.6063, -0.1952, 0.8094, -0.9259, 0.4836 0.5477, -0.7487, 0.2370, -0.9793, 0.0773, 0.1241 0.2450, 0.8116, 0.9799, 0.4222, 0.4636, 0.2355 0.8186, -0.1983, -0.5003, -0.6531, -0.7611, 0.1511 -0.4714, 0.6382, -0.3788, 0.9648, -0.4667, 0.5950 0.0673, -0.3711, 0.8215, -0.2669, -0.1328, 0.2677 -0.9381, 0.4338, 0.7820, -0.9454, 0.0441, 0.5518 -0.3480, 0.7190, 0.1170, 0.3805, -0.0943, 0.4724 -0.9813, 0.1535, -0.3771, 0.0345, 0.8328, 0.5438 -0.1471, -0.5052, -0.2574, 0.8637, 0.8737, 0.3042 -0.5454, -0.3712, -0.6505, 0.2142, -0.1728, 0.5783 0.6327, -0.6297, 0.4038, -0.5193, 0.1484, 0.1153 -0.5424, 0.3282, -0.0055, 0.0380, -0.6506, 0.6613 0.1414, 0.9935, 0.6337, 0.1887, 0.9520, 0.2540 -0.9351, -0.8128, -0.8693, -0.0965, -0.2491, 0.7353 0.9507, -0.6640, 0.9456, 0.5349, 0.6485, 0.1059 -0.0462, -0.9737, -0.2940, -0.0159, 0.4602, 0.2606 -0.0627, -0.0852, -0.7247, -0.9782, 0.5166, 0.2977 0.0478, 0.5098, -0.0723, -0.7504, -0.3750, 0.3335 0.0090, 0.3477, 0.5403, -0.7393, -0.9542, 0.4415 -0.9748, 0.3449, 0.3736, -0.1015, 0.8296, 0.4358 0.2887, -0.9895, -0.0311, 0.7186, 0.6608, 0.2057 0.1570, -0.4518, 0.1211, 0.3435, -0.2951, 0.3244 0.7117, -0.6099, 0.4946, -0.4208, 0.5476, 0.1096 -0.2929, -0.5726, 0.5346, -0.3827, 0.4665, 0.2465 0.4889, -0.5572, -0.5718, -0.6021, -0.7150, 0.2163 -0.7782, 0.3491, 0.5996, -0.8389, -0.5366, 0.6516 -0.5847, 0.8347, 0.4226, 0.1078, -0.3910, 0.6134 0.8469, 0.4121, -0.0439, -0.7476, 0.9521, 0.1571 -0.6803, -0.5948, -0.1376, -0.1916, -0.7065, 0.7156 0.2878, 0.5086, -0.5785, 0.2019, 0.4979, 0.2980 0.2764, 0.1943, -0.4090, 0.4632, 0.8906, 0.2960 -0.8877, 0.6705, -0.6155, -0.2098, -0.3998, 0.7107 -0.8398, 0.8093, -0.2597, 0.0614, -0.0118, 0.6502 -0.8476, 0.0158, -0.4769, -0.2859, -0.7839, 0.7715 0.5751, -0.7868, 0.9714, -0.6457, 0.1448, 0.1175 0.4802, -0.7001, 0.1022, -0.5668, 0.5184, 0.1090 0.4458, -0.6469, 0.7239, -0.9604, 0.7205, 0.0779 0.5175, 0.4339, 0.9747, -0.4438, -0.9924, 0.2879 0.8678, 0.7158, 0.4577, 0.0334, 0.4139, 0.1678 0.5406, 0.5012, 0.2264, -0.1963, 0.3946, 0.2088 -0.9938, 0.5498, 0.7928, -0.5214, -0.7585, 0.7687 0.7661, 0.0863, -0.4266, -0.7233, -0.4197, 0.1466 0.2277, -0.3517, -0.0853, -0.1118, 0.6563, 0.1767 0.3499, -0.5570, -0.0655, -0.3705, 0.2537, 0.1632 0.7547, -0.1046, 0.5689, -0.0861, 0.3125, 0.1257 0.8186, 0.2110, 0.5335, 0.0094, -0.0039, 0.1391 0.6858, -0.8644, 0.1465, 0.8855, 0.0357, 0.1845 -0.4967, 0.4015, 0.0805, 0.8977, 0.2487, 0.4663 0.6760, -0.9841, 0.9787, -0.8446, -0.3557, 0.1509 -0.1203, -0.4885, 0.6054, -0.0443, -0.7313, 0.4854 0.8557, 0.7919, -0.0169, 0.7134, -0.1628, 0.2002 0.0115, -0.6209, 0.9300, -0.4116, -0.7931, 0.4052 -0.7114, -0.9718, 0.4319, 0.1290, 0.5892, 0.3661 0.3915, 0.5557, -0.1870, 0.2955, -0.6404, 0.2954 -0.3564, -0.6548, -0.1827, -0.5172, -0.1862, 0.4622 0.2392, -0.4959, 0.5857, -0.1341, -0.2850, 0.2470 -0.3394, 0.3947, -0.4627, 0.6166, -0.4094, 0.5325 0.7107, 0.7768, -0.6312, 0.1707, 0.7964, 0.2757 -0.1078, 0.8437, -0.4420, 0.2177, 0.3649, 0.4028 -0.3139, 0.5595, -0.6505, -0.3161, -0.7108, 0.5546 0.4335, 0.3986, 0.3770, -0.4932, 0.3847, 0.1810 -0.2562, -0.2894, -0.8847, 0.2633, 0.4146, 0.4036 0.2272, 0.2966, -0.6601, -0.7011, 0.0284, 0.2778 -0.0743, -0.1421, -0.0054, -0.6770, -0.3151, 0.3597 -0.4762, 0.6891, 0.6007, -0.1467, 0.2140, 0.4266 -0.4061, 0.7193, 0.3432, 0.2669, -0.7505, 0.6147 -0.0588, 0.9731, 0.8966, 0.2902, -0.6966, 0.4955 -0.0627, -0.1439, 0.1985, 0.6999, 0.5022, 0.3077 0.1587, 0.8494, -0.8705, 0.9827, -0.8940, 0.4263 -0.7850, 0.2473, -0.9040, -0.4308, -0.8779, 0.7199 0.4070, 0.3369, -0.2428, -0.6236, 0.4940, 0.2215 -0.0242, 0.0513, -0.9430, 0.2885, -0.2987, 0.3947 -0.5416, -0.1322, -0.2351, -0.0604, 0.9590, 0.3683 0.1055, 0.7783, -0.2901, -0.5090, 0.8220, 0.2984 -0.9129, 0.9015, 0.1128, -0.2473, 0.9901, 0.4776 -0.9378, 0.1424, -0.6391, 0.2619, 0.9618, 0.5368 0.7498, -0.0963, 0.4169, 0.5549, -0.0103, 0.1614 -0.2612, -0.7156, 0.4538, -0.0460, -0.1022, 0.3717 0.7720, 0.0552, -0.1818, -0.4622, -0.8560, 0.1685 -0.4177, 0.0070, 0.9319, -0.7812, 0.3461, 0.3052 -0.0001, 0.5542, -0.7128, -0.8336, -0.2016, 0.3803 0.5356, -0.4194, -0.5662, -0.9666, -0.2027, 0.1776 -0.2378, 0.3187, -0.8582, -0.6948, -0.9668, 0.5474 -0.1947, -0.3579, 0.1158, 0.9869, 0.6690, 0.2992 0.3992, 0.8365, -0.9205, -0.8593, -0.0520, 0.3154 -0.0209, 0.0793, 0.7905, -0.1067, 0.7541, 0.1864 -0.4928, -0.4524, -0.3433, 0.0951, -0.5597, 0.6261 -0.8118, 0.7404, -0.5263, -0.2280, 0.1431, 0.6349 0.0516, -0.8480, 0.7483, 0.9023, 0.6250, 0.1959 -0.3212, 0.1093, 0.9488, -0.3766, 0.3376, 0.2735 -0.3481, 0.5490, -0.3484, 0.7797, 0.5034, 0.4379 -0.5785, -0.9170, -0.3563, -0.9258, 0.3877, 0.4121 0.3407, -0.1391, 0.5356, 0.0720, -0.9203, 0.3458 -0.3287, -0.8954, 0.2102, 0.0241, 0.2349, 0.3247 -0.1353, 0.6954, -0.0919, -0.9692, 0.7461, 0.3338 0.9036, -0.8982, -0.5299, -0.8733, -0.1567, 0.1187 0.7277, -0.8368, -0.0538, -0.7489, 0.5458, 0.0830 0.9049, 0.8878, 0.2279, 0.9470, -0.3103, 0.2194 0.7957, -0.1308, -0.5284, 0.8817, 0.3684, 0.2172 0.4647, -0.4931, 0.2010, 0.6292, -0.8918, 0.3371 -0.7390, 0.6849, 0.2367, 0.0626, -0.5034, 0.7039 -0.1567, -0.8711, 0.7940, -0.5932, 0.6525, 0.1710 0.7635, -0.0265, 0.1969, 0.0545, 0.2496, 0.1445 0.7675, 0.1354, -0.7698, -0.5460, 0.1920, 0.1728 -0.5211, -0.7372, -0.6763, 0.6897, 0.2044, 0.5217 0.1913, 0.1980, 0.2314, -0.8816, 0.5006, 0.1998 0.8964, 0.0694, -0.6149, 0.5059, -0.9854, 0.1825 0.1767, 0.7104, 0.2093, 0.6452, 0.7590, 0.2832 -0.3580, -0.7541, 0.4426, -0.1193, -0.7465, 0.5657 -0.5996, 0.5766, -0.9758, -0.3933, -0.9572, 0.6800 0.9950, 0.1641, -0.4132, 0.8579, 0.0142, 0.2003 -0.4717, -0.3894, -0.2567, -0.5111, 0.1691, 0.4266 0.3917, -0.8561, 0.9422, 0.5061, 0.6123, 0.1212 -0.0366, -0.1087, 0.3449, -0.1025, 0.4086, 0.2475 0.3633, 0.3943, 0.2372, -0.6980, 0.5216, 0.1925 -0.5325, -0.6466, -0.2178, -0.3589, 0.6310, 0.3568 0.2271, 0.5200, -0.1447, -0.8011, -0.7699, 0.3128 0.6415, 0.1993, 0.3777, -0.0178, -0.8237, 0.2181 -0.5298, -0.0768, -0.6028, -0.9490, 0.4588, 0.4356 0.6870, -0.1431, 0.7294, 0.3141, 0.1621, 0.1632 -0.5985, 0.0591, 0.7889, -0.3900, 0.7419, 0.2945 0.3661, 0.7984, -0.8486, 0.7572, -0.6183, 0.3449 0.6995, 0.3342, -0.3113, -0.6972, 0.2707, 0.1712 0.2565, 0.9126, 0.1798, -0.6043, -0.1413, 0.2893 -0.3265, 0.9839, -0.2395, 0.9854, 0.0376, 0.4770 0.2690, -0.1722, 0.9818, 0.8599, -0.7015, 0.3954 -0.2102, -0.0768, 0.1219, 0.5607, -0.0256, 0.3949 0.8216, -0.9555, 0.6422, -0.6231, 0.3715, 0.0801 -0.2896, 0.9484, -0.7545, -0.6249, 0.7789, 0.4370 -0.9985, -0.5448, -0.7092, -0.5931, 0.7926, 0.5402
Test data:
# synthetic_test_40.txt # 0.7462, 0.4006, -0.0590, 0.6543, -0.0083, 0.1935 0.8495, -0.2260, -0.0142, -0.4911, 0.7699, 0.1078 -0.2335, -0.4049, 0.4352, -0.6183, -0.7636, 0.5088 0.1810, -0.5142, 0.2465, 0.2767, -0.3449, 0.3136 -0.8650, 0.7611, -0.0801, 0.5277, -0.4922, 0.7140 -0.2358, -0.7466, -0.5115, -0.8413, -0.3943, 0.4533 0.4834, 0.2300, 0.3448, -0.9832, 0.3568, 0.1360 -0.6502, -0.6300, 0.6885, 0.9652, 0.8275, 0.3046 -0.3053, 0.5604, 0.0929, 0.6329, -0.0325, 0.4756 -0.7995, 0.0740, -0.2680, 0.2086, 0.9176, 0.4565 -0.2144, -0.2141, 0.5813, 0.2902, -0.2122, 0.4119 -0.7278, -0.0987, -0.3312, -0.5641, 0.8515, 0.4438 0.3793, 0.1976, 0.4933, 0.0839, 0.4011, 0.1905 -0.8568, 0.9573, -0.5272, 0.3212, -0.8207, 0.7415 -0.5785, 0.0056, -0.7901, -0.2223, 0.0760, 0.5551 0.0735, -0.2188, 0.3925, 0.3570, 0.3746, 0.2191 0.1230, -0.2838, 0.2262, 0.8715, 0.1938, 0.2878 0.4792, -0.9248, 0.5295, 0.0366, -0.9894, 0.3149 -0.4456, 0.0697, 0.5359, -0.8938, 0.0981, 0.3879 0.8629, -0.8505, -0.4464, 0.8385, 0.5300, 0.1769 0.1995, 0.6659, 0.7921, 0.9454, 0.9970, 0.2330 -0.0249, -0.3066, -0.2927, -0.4923, 0.8220, 0.2437 0.4513, -0.9481, -0.0770, -0.4374, -0.9421, 0.2879 -0.3405, 0.5931, -0.3507, -0.3842, 0.8562, 0.3987 0.9538, 0.0471, 0.9039, 0.7760, 0.0361, 0.1706 -0.0887, 0.2104, 0.9808, 0.5478, -0.3314, 0.4128 -0.8220, -0.6302, 0.0537, -0.1658, 0.6013, 0.4306 -0.4123, -0.2880, 0.9074, -0.0461, -0.4435, 0.5144 0.0060, 0.2867, -0.7775, 0.5161, 0.7039, 0.3599 -0.7968, -0.5484, 0.9426, -0.4308, 0.8148, 0.2979 0.7811, 0.8450, -0.6877, 0.7594, 0.2640, 0.2362 -0.6802, -0.1113, -0.8325, -0.6694, -0.6056, 0.6544 0.3821, 0.1476, 0.7466, -0.5107, 0.2592, 0.1648 0.7265, 0.9683, -0.9803, -0.4943, -0.5523, 0.2454 -0.9049, -0.9797, -0.0196, -0.9090, -0.4433, 0.6447 -0.4607, 0.1811, -0.2389, 0.4050, -0.0078, 0.5229 0.2664, -0.2932, -0.4259, -0.7336, 0.8742, 0.1834 -0.4507, 0.1029, -0.6294, -0.1158, -0.6294, 0.6081 0.8948, -0.0124, 0.9278, 0.2899, -0.0314, 0.1534 -0.1323, -0.8813, -0.0146, -0.0697, 0.6135, 0.2386
.NET Test Automation Recipes
Software Testing
SciPy Programming Succinctly
Keras Succinctly
R Programming
Visual Studio Live
Microsoft MLADS Conference
DevIntersection Conference
Machine Learning Week
Ai4 Conference
G2E Conference
iSC West Conference
You must be logged in to post a comment.